One of the most common AdBlue problems is when it is mixed with diesel. The best way to diagnose this problem is to run a diagnostic test with an OBD II scanner. If the symptoms persist, you may have a faulty NOx sensor. In this case, it is wise to remove the AdBlue from the fuel tank. If the symptoms do not disappear, contact the manufacturer to replace the sensor. Generally, the repair is quite inexpensive, and it can be done the same day.
Another common AdBlue problem is contamination. If you do not regularly clean the AdBlue tank, the pollutants will enter the fluid and may lead to a malfunction of the SCR system. While the vehicle is not a safety hazard, contaminated fluid could affect other parts of the vehicle. To ensure the fluid’s quality, you should follow the manufacturer’s instructions and wear gloves when handling the vehicle. After cleaning the AdBlue tank cap, you should check the concentration of the fluid. The recommended concentration is between 32 and 37%.
Another common AdBlue problem is that the AdBlue tank is prone to condensation. This can lead to contamination. To prevent this problem, you should periodically refresh the AdBlue tank. Besides, it is important to follow the manufacturer’s instructions on how to remove the water from the AdBlue system. The following are some steps to solve common AdBlue problems. However, keep in mind that you should never use water instead of the AdBlue solution.
Besides the usual AdBlue problems, you should also make sure that your vehicle’s AdBlue tank is equipped with a blue cap. The cap should be sealed tightly so that water and other liquids do not mix with the substance. The water should be removed by professionals in order to avoid any potential issues with the Selective Catalytic Reduction system. Remember to never use water as a substitute for AdBlue. You will be guilty of violating emission standards if you do this.
If you’re worried that your AdBlue tank has water, contact a professional for help. Unless you’re sure that the AdBlue is the right type for your vehicle, it will not perform properly. You’ll need to hire a professional to remove the water from the tank. In some cases, the water will cause an engine to stop. If your car’s AdBlue tank is leaking, it will not start at all.
If you’re worried about the amount of water in your AdBlue tank, you should consult a specialist. While it’s important to ensure that the fluid is not overfilled, it’s also important to make sure that you don’t overfill the tank with water. While it may seem like a simple problem, it could lead to a more complicated problem. If your vehicle has a faulty NOx sensor, it won’t function properly. You should consult with a professional to have the sensor replaced.